manualshive.com logo in svg

Sartorius PR5230, Instrument Manual, Page: 186 / 208

Share
Download
Sartorius PR5230 Instrument Manual Download Page 186

Specifications

 

PR5230 Instrument Manual 

EN-186 

Sartorius 

14.5.10

 

Network Interface 

Ethernet 100 

Mbd 

14.5.11

 

Fieldbus Interfaces (Options) 

ProfiBus-DP  
DeviceNet  
InterBus-S  
CC-Link  
ProfiNet I/O 

 

EtherNet-IP  

14.6

 

Mechanical Data 

14.6.1

 

Construction 

Metal housing of stainless steel with front cover, Protection class IP 66 

14.6.2

 

Dimensions/Weights 

Dimensions  
 Width   

350 

mm 

 Height   

250 

mm 

 Depth   

120 

mm 

Weights  
 Net 

 

6 

kg 

 

Shipping weight 

 

7 kg 

14.7

 

Use in Legal-for-Trade Mode 

The Guide to Verification and further documents can be found on the Internet at: 
www.sartorius-mechatronics.com 

14.7.1

 

Documentation for Verification on the Enclosed CD 

The enclosed CD has a directory containing the following documents: (in preparation) 
-

 

EC Declaration of Conformity 

-

 

Plates and markings (sealing and labels) 

-

 

Test certificate for the instrument 

-

 

EC type approval 

14.7.2

 

Additional Instructions 

Information on the meaning of the CAL switch to be sealed can be found in Chapter 5.1.1. 
Make sure when configuring the instrument (see Chapter 5.4.12 ) that the settings are in compliance with the 

legal requirements and the requirements of the EC Type Approval and the EC Test Certificate. Furthermore, the 

settings and functions described under Item 7 of the EC Test Certificate (Orders and Conditions) must be 

checked. The person performing installation is responsible for selecting the legally permitted settings. The 

settings must be checked. 
 
 

 

Summary of Contents for PR5230

















































































































































































































Reviews:

No comments