18
English
INTRO
DUC
TI
ON
SE
TTIN
GS
NETWORK
CONTROL
NETWORK
SETTINGS
NETWO
R
K
OPER
ATION
OTHE
R
OPERATION
1
PREPARING FOR USE
When the power is turned on, the operation display is shown
at the top of the monitor screen. This area indicates the date,
time, picture quality and other information needed for
operation.
* The above is an example display. This is not the default.
(1) Date display (
J
P.20)
Be sure to specify the correct date using menu settings.
(2) Time display (
J
P.20)
Make sure to specify the time using menu settings. Recording
is not possible until the time is set.
(3) Operation symbol display
Displays the current operation, such as recording or playback.
z
The digital video recorder uses the date and time to
manage recording and playback points. Accordingly, if the
time has not been set correctly, it is not possible to
effectively search for video data.
z
During simultaneous recording and playback, the display
indicates playback (
).
(4) Remaining memory in recording area (
J
P.80)
It is displayed while recording.
Displays the remaining area memory as a percentage when
overwriting in the recording area is not permitted. If
overwriting is permitted, “REPEAT” is displayed.
(5) Picture quality display (
J
P.83, P.94)
Displays the quality of the video that can be recorded on the
hard disk. Set to “EN” (Enhanced) by default setting.
[Settings] (
indicates default setting)
(6) Audio recording display
“A” is displayed when audio is being recorded. “A” is displayed
when audio is being played back if audio is recorded. When
the [AUDIO] button is pressed, the audio channel (OFF/A1/
A2/A12) is displayed.
(7) Alarm display and alarm count display (
J
P.93)
When an alarm is set using the “ALARM REC MODE SET”
menu item, the following information is displayed.
z
When alarm recording is set;
“ALARM” and the alarm number are displayed in stand-by
mode.
“ALARM” flashes during alarm recording.
z
When pre-alarm recording is in progress;
“PRE” and the alarm number are displayed in stand-by
mode.
When an alarm occurs, “PRE” disappears and “ALARM”
and the alarm number are displayed.
z
When performing playback from the archive area;
“ARCHIV” and the backup number are displayed.
(8) Camera title display
The camera number or camera title is displayed. Also, when
an alarm occurs the camera number and alarm “EA”, “SA”, or
“ES” are displayed.
z
When an external alarm signal is activated;
“EA” flashes to the left of the camera number.
z
When a motion sensor alarm signal is activated;
“SA” flashes to the left of the camera number.
z
When an external alarm signal and motion sensor signal
are activated;
“ES” flashes to the left of the camera number.
z
Although operations such as playback, copying and data
transfer are possible while recording, this unit gives priority
to recording, and other operations may be delayed as a
result.
Operation display
REC: Recording
: Fast-forward playback
EXT: External timer recording
: Fast-rewind playback
: Normal playback
: Slow playback
: Reverse playback
: Reverse slow playback
: Still
02
0
01-01-05 00:00:00 REC REPEAT EN A ALARM 0000000
01-01-05 00:00:00 REC REPEAT EN A ALARM 0000000
02
(1)
(2)
(3)
(4)
(5)(6)
(7)
(8)
Operation
display area
BA
Basic
NO
Normal
EN
Enhanced
FI
Fine
SF
Super Fine
e00_l8hbd_us_7.book Page 18 Thursday, March 31, 2005 5:49 PM
