140
English
ADVANCED MENU SET
8
INTRO
DUC
TI
ON
SE
TTIN
GS
NETWORK
CONTROL
NETWORK
SETTINGS
NETWO
R
K
OPER
ATION
OTHE
R
OPERATION
7
Turn the jog dial to select the
“QUALITY” setting and then turn the
shuttle dial clockwise.
“OFF” flashes for “ACTIVE ROI”.
[Settings] (
indicates default setting)
8
Turn the jog dial to select “ON” or “OFF”
and then turn the shuttle dial clockwise.
The cursor moves to “STATIC AREA 2”.
[Settings] (
indicates default setting)
9
Use the same procedure to set the
“QUALITY” and “ACTIVE ROI” settings
in “STATIC AREA 2” and “STATIC
AREA 3”.
10
Turn the shuttle dial clockwise.
The cursor moves to “EFFECTIVE REC MODE”.
11
Turn the shuttle dial clockwise.
“NORMAL REC” flashes.
12
Turn the jog dial to select the
“EFFECTIVE REC MODE” setting and
then turn the shuttle dial clockwise.
Set the recording mode to enable ROI.
[Settings] (
indicates default setting)
Setting
Description
MIN
Lowest quality
LOW
Low quality
OFF
Normal
(Same picture quality as outside ROI area)
HIGH
Fine
MAX
Best quality
Setting
Description
OFF
Activates ROI always
ON
Activates ROI only in areas with motion
detected
<ROI SET>
CH-01 QUALITY ACTIVE ROI
STATIC AREA 1 : MIN OFF
STATIC AREA 2 : OFF OFF
STATIC AREA 3 : OFF OFF
EFFECTIVE REC MODE : NORMAL REC
AREA/SENSITIVITY SET ---->
<ROI SET>
CH-01 QUALITY ACTIVE ROI
STATIC AREA 1 : MIN OFF
STATIC AREA 2 : OFF OFF
STATIC AREA 3 : OFF OFF
EFFECTIVE REC MODE : NORMAL REC
AREA/SENSITIVITY SET ---->
<ROI SET>
CH-01 QUALITY ACTIVE ROI
STATIC AREA 1 : MIN OFF
STATIC AREA 2 : LOW OFF
STATIC AREA 3 : HIGH OFF
EFFECTIVE REC MODE : NORMAL REC
AREA/SENSITIVITY SET ---->
Setting
Description
NORMAL REC
ROI is enabled during normal recording.
ALARM REC
ROI is enabled during alarm recording.
NORMAL/
ALARM
ROI is enabled during normal and alarm
recording.
<ROI SET>
CH-01 QUALITY ACTIVE ROI
STATIC AREA 1 : MIN OFF
STATIC AREA 2 : LOW OFF
STATIC AREA 3 : HIGH OFF
EFFECTIVE REC MODE : NORMAL REC
AREA/SENSITIVITY SET ---->
<ROI SET>
CH-01 QUALITY ACTIVE ROI
STATIC AREA 1 : MIN OFF
STATIC AREA 2 : LOW OFF
STATIC AREA 3 : HIGH OFF
EFFECTIVE REC MODE : NORMAL REC
AREA/SENSITIVITY SET ---->
<ROI SET>
CH-01 QUALITY ACTIVE ROI
STATIC AREA 1 : MIN OFF
STATIC AREA 2 : LOW OFF
STATIC AREA 3 : HIGH OFF
EFFECTIVE REC MODE : NORMAL REC
AREA/SENSITIVITY SET ---->
e00_l8hbd_us_7.book Page 140 Thursday, March 31, 2005 5:49 PM