Sanyo DSR-5009P, Instruction Manual

Page: 129 / 227

128
English
SCREEN SET 4
INTRO
DUC
TI
ON
SE
TTIN
GS
NETWORK CONTROL
NETWORK SETTINGS
NETWO
R
K
OPER
ATION
OTHE
R
OPERATION
Use the following procedure to scroll through video from all
cameras at a specified interval.
The interval for automatic selection can only be set for full
screen and quad display.
Example: Automatic switching of the full-screen display
every 5 seconds.
1
Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU> is
displayed.
2
Turn the jog dial to select “4.SCREEN
SET” and then turn the shuttle dial
clockwise.
The <SCREEN SET> screen is displayed.
3
Turn the jog dial to select “FULL” for
“2.SEQUENCE SET” and then turn the
shuttle dial clockwise.
“1S” flashes for “FULL”.
4
Turn the jog dial to set the interval to
“5S” and then turn the shuttle dial
clockwise.
Automatic selection is set to an interval of 5 seconds.
5
Use the same operation to set the
switching interval for quad screen
display.
“INDIV.” cannot be selected for “QUAD”.
z The interval applies to all cameras on the main monitor and
monitor 2. To set the interval for each camera when
displaying video at full screen, select “INDIV.” in step 4 and
then go to “MAIN/MON.2 MONITOR SET”.
z The interval can be set anywhere between 1 and 30
seconds.
6
Press the [EXIT/OSD] button.
The setting is completed and the display returns to the normal
screen.
Example: Setting the display interval of each camera’s
video for the main monitor and monitor 2.
1
Make timer settings for “TIME PERIOD
A” and “TIME PERIOD B” on the <TIME
PERIOD SET> screen. (
J
P.69)
Specify “TIME PERIOD A” and “TIME PERIOD B”.
2
Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU> is
displayed.
Setting the interval and monitors for
automatic screen selection
MENU
<SCREEN SET>
1.MULTI SCREEN : NORMAL
QUAD POSITION SET ->
MULTI 9 POSITION SET ->
MULTI 16 POSITION SET ->
2.SEQUENCE SET
FULL : 1S QUAD : 1S
MAIN/MON.2 MONITOR SET ->
3.MASK : OFF
MASK SET ->
4.COLOR LEVEL SET ->
Setting the time period to switch the display on
the main monitor and monitor 2
<SCREEN SET>
1.MULTI SCREEN : NORMAL
QUAD POSITION SET ->
MULTI 9 POSITION SET ->
MULTI 16 POSITION SET ->
2.SEQUENCE SET
FULL : 5S QUAD : 1S
MAIN/MON.2 MONITOR SET ->
3.MASK : OFF
MASK SET ->
4.COLOR LEVEL SET ->
EXIT/OSD
MENU
e00_l8hbd_us_7.book Page 128 Thursday, March 31, 2005 5:49 PM