Sanyo Denki SANMOTION 3E S, Instruction Manual, Page: 248 / 488

7. Digital Operator
7-7
■
Hexadecimal data
■
Decimal point indication
■
Data of amplifier operating time
* Left end LED expresses digits of data. It switches when MODE is pushed 1sec or more.
■
Average power monitor display (Monitor ID: 4A)
Display range of average power is automatically changed depending on the value, to
indicate optimum range.
When average power exceed 1000W, "H" is indicated to highest digit and unit is changed to
[kW].
Also, decimal point moves a position depending on average power.
Symbol Digital operator display Range of a digit display
Digits of msec unit 0 to 999
Digits of sec unit 0 to 59
Digits of minute unit 0 to 59
Lower 4 digits of
hour unit
0 to 9999
Higher 4 digits of
hour unit
0 to 9999
Average power range Example display Unit
-999999.9 W < Average power
≦
-99950.0 W [kW]
-99950.0 W < Average power
≦
-9995.0 W [kW]
-9995.0 W < Average power
≦
-1000.0 W [kW]
-999.9 W
≦
Average power
≦
+999.9 W [W]
1000.0 W
≦
Average power <+9995.0 W
[kW]
9995.0 W
≦
Average power <+99950.0 W [kW]
99950.0 W
≦
Average power <+999999.9 W [kW]
Symbol Digital operator display Range of a digit display
1 byte 00 to FF
2bytes 0000 to FFFF
4 bytes low 0000 to FFFF (Bit15 to Bit0) display
4 bytes high 0000 to FFFF (Bit31 to Bit16) display
First position of a decimal point
Second position of a decimal point