Sanyo Denki SANMOTION 3E S, Instruction Manual, Page: 129 / 488

3.3 Linear motor
3-22
3
Inst
allation
7
Place magnet rails from the end in order. When mounting a magnet rail next to the already fixed magnet
rail, put the magnet rail from the stroke direction not from the orthogonal (facing magnet surface).
Magnetic attraction can generate, and this can cause injuries and damages.
■ Mounting coil
Step Description
1
First mount one-half of the entire length of magnet rail. Make sure that both the magnet rail length and
the length magnet rail not yet mounted shall be more than 50mm longer than coil length.
2
Mount dummy magnet rail on the stroke area magnet rail not mounted, insert motor coil into the area
dummy magnet rail mounted. Take care not to get your fingers stuck between motor coil and base.
(Prepare the dummy magnet rail for D###C1-4 only. Refer to the outline drawing, for shape.)
Magnet rail: fixed
Nonmagnetic spacer
Nonmagnetic spacer
Magnet rail: fixed
Shock absorber
Linear guide
Linear guide rail
Linear encoder
(Scale tape)
Linear motor
(Magnet rail)
Stage
Linear encoder
(Read head)
Linear motor (Coil)
Dummy magnet rail
(Prepare for D###C1-4 only)
Linear motor
(Magnet rail)
Spacer