Sanyo Denki SANMOTION 3E S, Instruction Manual, Page: 11 / 488

Safety Precautions
vii
■
Operation
Caution

Do not perform extensive adjustments to the device as they may result in unstable
operation.
Bodily injury could otherwise result.

Trial runs should be performed with the motor in a fixed position, separated from the
mechanism. After verifying successful operation, install the motor on the mechanism.
Bodily injury could otherwise result.

The holding brake is not to be used as a safety stop for the mechanism. Install a safety
stop device on the mechanism.
Bodily injury could otherwise result.

In the case of an alarm, first remove the cause of the alarm, and then verify safety. Next,
reset the alarm and restart the device.
Bodily injury could otherwise result.

Check that input power supply voltage is keeping a specification range.
Damage to the device could otherwise result.

Avoid getting close to the device, as a momentary power outage could cause it to
suddenly restart (although it is designed to be safe even in the case of a sudden restart).
Bodily injury could otherwise result.

Do not use motor or amplifier which is defective or failed and damaged by fire.
Injury or fire could otherwise result.

In the case of any irregular operation, stop the device immediately.
Electric shock, injury or fire could otherwise result.

When using the servo motor in vertical axis, provide safety devices to prevent falls
during the work that will cause an alarm condition.
Injury or damage could result.