Sanken Samco SVC06, Instruction Manual, Page: 89 / 136

- 87 -
C
h
ap
ter
7
-
87
-
7-2 Function Code List
– Input/Output-Related Functions
Code No. Function Name Data Content
Setting
Resolution
Factory
Presets
User
Setting
Value
1508 Frequency matching range 0-10Hz 0.01Hz 0
1509
1510
1511 Selection of output terminal DO1
Selection of output terminal DO2
Selection of output terminal DO3
0: Unused
1: In operation 1
2: Undervoltage,
3:
End of simple scheduled operation
4: In operation 2,
5: Frequency matching (1st speed frequency)
6: Frequency matching (1st to 16th speed frequencies)
7: Frequency approach
8: Overload alarm level setting signal (the value of F1704)
9: Electric thermistor pre-alarm signal
(80% of electric thermistor)
10: Radiator overheat pre-alarm signal
，
13: Excitation and DC braking signals
14: Lower frequency limit matching signal
，
15: Upper frequency limit matching signal
，
16: Servo on ready signal,
17: Zero servo completion signal,
18: FR signal,
19: RR signal,
20: 2DF signal, 21: 3DF signal,
22: 5DF signal, 23: 9DF signal,
24: AD2 signal,
25: AD3 signal,
26: JOG signal, 27: MBS signal,
28: ES signal, 29: RST signal,
31: Positioning completion signal ,
32: Discharge resistor on signal,
34: Frequency counter (output frequency),
35: Frequency counter (command frequency),
36: Overload alarm level setting signal
(Including when in acceleration/deceleration ),
42: Torque matching signal
，
43: Low speed detection signal
47: Motor speed counter
48: Forward run detection signal
49: Reverse run detection signal
1 1
5
8
1512 Counter output multiple 1-100 1 1
1513 Relay 1 contact output selection
0: Alarm contact
1: In operation 1,
2: Undervoltage,
3: End of simple scheduled operation
4: In operation 2,
5: Frequency matching (1st speed frequency)
6: Frequency matching (1st to 16th speed frequencies)
7: Frequency approach
8: Overload alarm level setting signal (the value of F1704)
9: Electric thermistor pre-alarm signal
(80% of electric thermistor)
10: Radiator overheat pre-alarm signal
，
13: Excitation and DC braking signals
14: Lower frequency limit matching signal
，
15: Upper frequency limit matching signal
，
16: Servo on ready signal
17: Zero servo completion signal,
18: FR signal, 19: RR signal,
20: 2DF signal, 21: 3DF signal,
22: 5DF signal, 23: 9DF signal,
24: AD2 signal, 25: AD3 signal,
26: JOG signal, 27: MBS signal,
28: ES signal, 29: RST signal,
31: Positioning completion signal,
32: Discharge resistor on signal,
36: Overload alarm level setting signal
(Including when in acceleration/deceleration ),
42: Torque matching signal
，
43: Low speed detection signal
48: Forward run detection signal
49: Reverse run detection signal
1 0
1515 Current output multiple 0-20 0.01 1
1516 Torque matching level 0-±200% 0.1 % 100
1517 Torque matching range 0-50% 0.1 % 25
1518 Low speed matching level 0-2,000rpm 1rpm 100
1519 Low speed matching range 0-100rpm 1rpm 10