Sanken Samco SVC06, Instruction Manual, Page: 34 / 136

- 32 -
4-5 Composition of Control Circuit Terminals
4-5 Composition of Control Circuit Terminals
4-5-1 Wire size and terminal arrangement
Terminal screw diameter: M3
Recommended wire size 0.75 [mm
2
]
Tightening torque: 0.5[N•m]
The arrangement of control circuit terminals is as shown in the following.
A- B＋ B- I＋
ACM1
FA1 FB1 FC1 DCM1 DO1 DO2 DO3 DOE A＋
AOUT1 AOUT2 +V VIF3
VIF2 ASG
DI4 DI5 DI6 DI7 DI8
DCM2 +24V2 ACM2 VIF1 +24V1 DI1 DI2 DI3

The common end of control circuit terminals shall not be grounded to the earth. In addition, DCM1/DCM2 shall
not be in common use with ACM1/ACM2. (Because they are insulated with each other).

Use shielded wires for wiring connected to the control circuit terminals, and connect one end of the shielding to
each common terminal or dedicated terminal, and leave the other end open. (refer to 4-3 Terminal connection
diagram).

Do not input the voltage to multifunctional terminals (DI1
-
DI8).