Sanken Samco SVC06, Instruction Manual, Page: 61 / 136

- 59 -
C
h
ap
ter
5
-
59
-
5-5 Special functions
5-5-3 Function code initialization operation
The inverter’s function code settings can be returned to factory presets through this function.
Inverter’s initial value can be set to the factory preset or the data determined by the user (i.e. user’s initial value).
Also, the initial value can be selected between the factory presets and the user’s initial value. By setting the user’s
initial value, the function code data can be initialized to the user’s initial value even if it is overwritten for some
reason, allowing for resetting the function code within a minimum range.
Operation example: recovering to the factory presets
Operation Display Description
Select function code F1604 (data initialization)
or
(press)
Press the (Set) key or quick knob, then the set value of
function code will be displayed.
Turn the quick knob to select 1
If F1604 = 1, all the function code data will recover to the
factory presets
Pressed the (Set) key, then the set value and
will be alternately displayed, suggesting that the settings is
being confirmed (* 1)
Press the (Set) key to start initialization of the function
code. During initialization, a flashing
will be
displayed on 7-segment monitor.
After
initialization When initialization is completed, the interface will return to
function code selection.
*1: In the alternate display, if an operation error occurs and it is hoped to interrupt input, then the interface can be
returned to the function code selection state by pressing the (Back) key or key.
See the contents of function code F1604 of the function and its operation method.