Sanken Samco SVC06, Instruction Manual, Page: 115 / 136

- 113 -
-
1
1
3
-
Ch
ap
ter
10
10-3 Part Replacement
（
4
）
Steps for replacing fan of SVC06-0370 ~0450
The fan is on the top of the device.
Step 1 Remove four screws (M4×8).
Step 2 Pull out the cover board with a hand.
Step 3 Remove two screws (M4×60).
Step 4 Pull out the fan and remove the connector, then make a replacement.
After the replacement, reinstall the fan with a sequence of 4→3 →2→ 1.
Figure 10-4 Replacement steps of fan
（
SVC06-0370 ~0450
）
（
5
）
Steps for replacing fan of SVC06-0550 ~0750
The fan is on the top of the device.
Step 1 Remove four screws (M4×8).
Step 2 Pull out the cover board with a hand.
Step 3 Remove four screws (M4×60).
Step 4 Pull out the fan and remove the connector, then make a replacement.
After the replacement, reinstall the fan with a sequence of 4→3 →2→ 1.
Figure 10-5 Replacement steps of fan
（
SVC06-0550 ~0750
）
M4×8 screw
Cover board
M4×60 screw
Fan
Connector
Cover board
M4×60 screw
Fan
Connector
Direction of wind
Direction of wind
M4×8 screw