Sanken Samco SVC06, Instruction Manual, Page: 73 / 136

- 71 -
C
h
ap
ter
6
-
71
-
6-2 Test run
[Motor parameter auto tuning steps]
(1) Setting of motor ratings
Set all the motor ratings into function codes F5001
-
F5005 correctly.
・
Please make function code display by pressing the key.
・
After displaying the F5001 in the quick knob, please press the key.
・
Please select the settings in the quick knob.
・
If you want to confirm the settings, please press the key.
(Please Press the key to cancel the setting.)
Set function codes F5002
-
F5005 in order in the same way.
①
F5001 Motor poles, voltage and capacity

The configurable values and contents denoted are as follows.
1)
Number of poles: 2
-
8 (4 types).
2 4 6 8
2)
Rated voltage: the setting range of rated voltage is denoted by serial numbers. Unit: [V].
No. 1 2 3 4 5 6 7 8
Corresponding rated
voltage
200 220 230 380 400 415 440 460
3)
Motor capacitor: the setting range of motor capacitor is denoted as follows. Unit: [kW].
0.37 0.40 0.55 0.75
△
1.1
△
1.5
△
2.2
△
3.0
△
3.7
△
4.0
△
5.5
△
7.5 11.0 15.0
18.5 22.0 30.0 37.0 45.0 55.0 75.0
90.0 110 132 160 185 200 220
250 280 315 355
The symbol
△
indicates a space.
Example) When using a motor of 4 poles, 220V, 2.2kW, the 7-segment monitor displays the following:
Operation example) in case where a motor of 4 poles, 200V, 2.2kW is used, operation for changing the rated
voltage is as follows:
Note: During vector control and auto torque boost control, standard values of various control constants necessary for
inverter control need to be obtained from the settings of the function code, thus please make correct setting
according to the motor used.
In addition, the basic range of configurable value for vector control is shown as follows. Please consult separately
about use of other specifications for vector control.
Number of poles: 2, 4, and 6
Rated voltage: No. 3 or below for 200V series inverters
No. 4 or above for 400V series inverters
Motor capacity: If the motor does not have a capacity equal to or one level lower than the inverter,
or may be displayed.