Sanken Samco SVC06, Instruction Manual, Page: 104 / 136

- 102 -
8-2 Conflict & Interference Error
Setting function code
Error code Description
No. Name Setting
1002 1st speed frequency setting 2-20
26-28
Exxxx Cannot set analog input repeatedly
25 E1001 When 1st speed frequency is pulse train input, the required PG
sensor control mode cannot be used
1003 V/f pattern 2, 3 E2007 Automatic torque boost and square ratio lowing mode cannot
be used together
1007 Upper frequency limit All E1008 Upper frequency limit cannot be smaller than lower frequency
limit
E1001 Exceed the possible upper frequency limit
1008 Lower frequency limit All
E1007/E1316
/E1317
Lower frequency limit cannot be larger than upper frequency
limit
1010 Acceleration / deceleration curve 2, 3 E2007 Automatic torque boost and S acceleration / deceleration
degression cannot be used together
1101 Operation command selection 1, 3 E1001 During position control (F1001=6), only terminal board
command (F1101=2) can be used
1301 1st jump bottom frequency All E1302 No larger than the value of 1st jump top frequency
1302 1st jump top frequency All E1301 No smaller than the value of 1st jump bottom frequency
1303 2nd jump bottom frequency All E1304 No larger than the value of 2nd jump top frequency
1304 2nd jump top frequency All E1303 No smaller than the value of 2nd jump bottom frequency
1305 3rd jump bottom frequency All E1306 No larger than the value of 3rd jump top frequency
1306 3rd jump top frequency All E1305 No smaller than the value of 3rd jump bottom frequency
1316 2nd upper frequency limit All E1008 Upper frequency limit cannot be smaller than lower frequency
E1001 Exceed the possible upper frequency limit/motor parameter
sheet error
1317 3rd upper frequency limit All E1008 Upper frequency limit cannot be smaller than lower frequency
E1001 Exceed the possible upper frequency limit/motor parameter
sheet error
1411 Analog input switching for set
frequency gain
All Exxxx Cannot set analog input repeatedly
1901 Energy-saving mode selection 1 E1001 Only V/f control can use simple energy-saving mode
E2007 Automatic torque boost and simple energy-saving mode cannot
be used together
E3201 PID control action and simple energy-saving mode cannot be
used together
2 E1001 Only V/f control speed control can use simple energy-saving
mode
E2007 Automatic torque boost and auto energy-saving mode cannot
be used together
2002
V•f separation command voltage
0 Exxxx Cannot set analog input repeatedly
2007 Auto torque boost selection Beyond
0
E1003 Automatic torque boost, cannot be used unless V/f mode is
linear
E1010 Automatic torque boost, cannot be used unless acceleration /
deceleration curve is linear
E1901 Automatic torque boost and energy-saving mode cannot be
used together
2201 Scheduled operation selection 1,2 E1001 In current control mode, scheduled or disturbed operation
cannot be used
All Exxxx Cannot set analog input repeatedly
2236 Disturb modulation analog input
switching All Exxxx Cannot set analog input repeatedly
3001 PID1 command value input
switching All Exxxx Cannot set analog input repeatedly
3002 PID1 feedback input switching All Exxxx Cannot set analog input repeatedly
3101 PID2 command value input
switching All Exxxx Cannot set analog input repeatedly
3102 PID2 feedback input switching All Exxxx Cannot set analog input repeatedly