Samsung VP-L900, Training Manual

Page: 43 / 173

4-10
Disassembly and Reassembly
Samsung Electronics
4-2-5 Sub Chassis
Fig. 4-14 Sub Chassis
4-2-5 (A) Disassembly
1. Remove 2 screws Π.
2. Lift the Sub Deck Ass’y ´ from the Main Deck
Ass’y ˇ .
4-2-5 (B) Reassembly
1. Align the Main-Base Hole with the Lever-Cam Hole
as shown in Fig. A.
2. Push the Pole-Base T 9 and the Pole-Base S 0 in the
direction of arrows “A, B”.
3. Push the Arm Tension Ass’y
∏
in the direction of
arrow “C” and then push it downward.
4. Insert the 2 BOSS ¨ of Sub Deck Ass’y ´ into the 2
Rails ˆ of Main Deck Ass’y ˇ .
5. Fit the Sub Deck Ass’y ´ to the Guide Pin 9 of Main
Deck Ass’y ˇ .
6. Install the Sub Deck Ass’y ´ with 2 screws Œ .
Note : After assembling the Sub Deck Ass’y
´
, make sure that
the Sub Deck Ass’y loads and unloads cor-rectly by applying 3V
to the Motor Loading.
”
SUB DECK CAM
˝
SUB DECK CAM
´
SUB DECK ASS'Y
∏
ARM TENSION ASS'Y
”
ARM REVIEW ASS'Y
Œ
2 SCREWS
¨
2 BOSS
ˆ
2 RAILS
ˇ
MAIN DECK ASS'Y
’
GUIDE PIN
Fig . B
C
B
A
Fig . A
Note 1 : When disassembling, take care not to damage any other
parts, Do not stain the roller and poles with oil or grease.
Note 2 : Always remove the Sub Deck Ass’y
´
when Deck
Ass’y is in unload mode.
Ø
PIN
LEVER CAM