Samsung VP-L900, Training Manual

Page: 30 / 173

Operating Instructions
Samsung Electronics 3-25
ENGLISH
57
Playing back the Tape
DSE in PLAYER mode
✤
The procedure for using DSE in PLAYER mode is the same as the procedure for using DSE in CAMERA mode,
except that the power switch must be set to PLAYER instead of CAMERA. Please refer to pages 40 and 41.
Note: The STROBE, NEG., MIRROR, MOSAIC, CINEMA and 16:9(WIDE) effects will not operate when your
camcorder is in PLAYER mode.
✤
Pressing the DSE button will scroll through the available settings. Stop at the one you require.
Maintenance
Cleaning and Careing for your Camcorder
Cleaning the Viewfinder
◆
Releasing the Eyepiece
1. Pull the viewfinder up and turn the screw counter- clock-wise.
2. Pull the eyepiece away from the viewfinder.
3. Clean the Eyepiece and the VIEWFINDER screen with
a soft cloth and cotton swab or a blower.
◆
Reattaching the Eyepiece
4. Replace the Eyepiece on the VIEWFINDER.
5. Replace and tighten the screw.
Cleaning the LCD Panel
Open the LCD Screen panel and wipe it gently with a soft cloth.
Be careful not to damage the display.
ENGLISH
58
Maintenance
Storing the Camcorder
1. You must detach the BATTERY PACK from
the camcorder when storing.
2. Keep the camcorder in a ventilated, dry and
warm place.
3. Do not keep the camcorder in a place where the
temperature often changes, such as in a car.
4. Keep the camcorder in a stable place.
a b c
Cleaning the Video Heads
✤
To ensure normal recording and clear pictures, clean the video heads.
✤
When the playback pictures are noisy or hardly visible, the video heads may be dirty.
a. Normal Picture
b, c. Noisy Picture
If this happens, clean the video heads
with a dry type head cleaning cassette.
1. Set the power switch to PLAYER mode.
2. Insert the cleaning tape.
3. Press the
(PLAY/STILL) button.
4. Press the ■ (STOP) button after about 30 seconds.
Check the quality of the picture using a video cassette. If it is still bad, repeat the operation.
If the problem continues, contact your local authorized service centre.