Samsung VP-L900, Training Manual

Page: 67 / 173

5-16
Alignment and Adjustments
Samsung Electronics
2-2. Head Switching Point
: This adjustment is performed after the replace-
ment of deck mechanism.
• Without this adjustment, there will be a noise in
playback picture.
a. Preparations
b. Connect a power source.
c. Get into the VCR adjustment mode.
d. Press the “BLC(MODE UP)” or “FADE(MODE
DOWN)” button of Camcorder so as to select the
address 061.
e. Insert the Standard Color Bar Tape and press the
“PLAY” button.
Note : If there is no video out, when you pressed the
“PLAY” button, you can not adjust the Head
Switching Point.
It may be caused by maladjusted VIDEO
block.
In this case, adjust the VIDEO block before
the Head Switching Point.
1. Kinds of adjustment in PLAY mode.
5-5-3 Adjustment
ADDRESS NAME
MODEL
NTSC PAL
061
062
HD SWP
Adjustment
1C
Model code setting
063
32. 768 KHZ CLOCK
064
MODEL CODE
065
D.ZOOM SIZE
TBC DEFAULT
05
88
01
2. Adjustment
* Please keep the order according to explanation.
2-1. Setting of the model code0
a. Preparation
b. Connect a power source.
c. Get into the VCR adjustment mode.
d. Press the “BLC(MODE UP)” or
“FADE(MODE DOWN)” button of Camcorder so
as to select the address 063.
e. Press the “DSE(DATA DOWN)/P.AE(DATA UP)”
so that OSD shows“ ”ERR:XX EVR: XX” “XX” is
different dependent on the model as below.
f. Be sure to press the “ENTER(CONFIRM)”
button on Camcorder to memorize setting.
g. Reset the power source so as to fix the new data to
the Camcorder’s EEPROM
TAPE
*NTSC
STANDARD COLOR BAR TAPE RECORDED
WITH SP SPEED
POWER SOURCE
NONE
NONE
061
HD SWP
EQUIPMENT
OTHER
TEST POINT
ADDRESS
NAME
TAPE NONE
POWER SOURCE
NONE
NONE
063
MODEL CODE0
EQUIPMENT
OTHER
TEST POINT
ADDRESS
NAME
MODEL NAME ADDRESSED CODE
VP-L900 64
VP-L906 7F
VP-L907 7F
PAL
Table. 5-5
Table. 5-6
Table. 5-7
Table. 5-8