Samsung VP-L900, Training Manual

Page: 50 / 173

Disassembly and Reassembly
4-17 Samsung Electronics
Fig. 4-21 Gear Capstan, Gear Pulley Ass’y, Belt Timing, Gear Cam Main, Lever Cam
Œ
WASHER SLIT
´
GEAR CAPSTAN
ˇ
BELT TIMING
¨
GEAR PULLEY ASS'Y
ˆ
GEAR CAM MAIN
Ø
LEVER CAM
∏
PIN
TIMING (A)
(HOLE)
TIMING (B)
(HOLE)
4-2-12 Gear Capstan, Gear Pulley Ass’y, Belt Timing, Gear Cam Main, Lever Cam
4-2-12 (A) Disassembly
1. Remove the Washer Slit Π. Then lift the Gear
Capstan ´ .
2. Remove the Belt Timing ˇ . Then lift the Gear
Pulley Ass’y ¨ .
3. Lift the Gear Cam Main ˆ and the Lever Cam Ø .
4-2-12 (B) Reassembly
1. Mount the Gear Pulley Ass’y ¨ on the main base.
Then hang the Belt Timing ˇ to the
Gear Pulley Ass’y ¨ .
2. Mount the Gear Capstan ´ so that the Belt Timing
ˇ is hung to the Gear Capstan ´ .
3. Install the Washer Slit Π.
4. Insert the Lever Cam Ø into the Pin ∏ .
5. Align the hole of the Lever Cam Ø with the Timing
hole “A” of the Main Base .
6. Align the hole of the Gear Cam Main ˆ with the
Timing hole “B” of the Main Base. Then mount the
Gear Cam Main
ˆ .
Note : When reassembling the Gear Cam Main 5, Align the tim-
ing point of the Gear Mode S/W. (See Fig. A)