Samsung VP-L900, Training Manual

Page: 72 / 173

Alignment and Adjustments
5-21
Samsung Electronics
Fig. 5-26
1) Tension Regulator Adjustment
(A) DISASSEMBLY
1. Refer to 4-2-2 (page 4-7) to remove the Housing
Ass’y.
(B) ADJUSTMENT
1. Set to PB mode (without cassette tape).
2. Check that the overlap between external surface of
Chassis Sub and external surface of Arm Tension is
0 ~ 1mm. (Fig. 5-26)
3. If necessary, proceed to step 4.
4. If the Arm Tension 1 is located inside the position
specified, adjust the Band Adjust Tension 2 toward
arrow A.
If it is located outside, adjust toward arrow B.
(C) REASSEMBLY
1. Refer to 4-2-2 (page 4-7) to mount the Housing
Ass’y.
Hole of Holder Loading
ARM TENSION 1
BAND ADJUST TENSION 2
C
B
A
0~1mm
Note : Check if the arm tension can be moved toward arrow C in
PB mode. Use the tape which is fed to the end.
5-6-4 Mechanical Check and Adjustment