Operating Instructions
Samsung Electronics
3-5
ENGLISH
Preparing
17
Lithium Battery Installation
Attaching the Lens Cover
✤
The lithium battery maintains the clock function, title and preset contents of the memory;
even if the battery pack or AC power adapter is removed.
✤
The lithium battery for the camcorder lasts about 8~10 months from the time of installation under normal operation.
✤
When the lithium battery becomes weak or dead, the date/time indicator flashes for about 5 seconds when you set
the power switch to CAMERA.
In this case, replace the lithium battery with CR2025 type.
1. Take out the holder from the lithium battery compartment.
2. Insert the
side of the lithium battery toward the bottom
of the holder.
3. Reinsert the holder into the lithium battery compartment.
Note:
The holder must be inserted in the correct direction
or it will not fit properly.
Warning: Keep the LITHIUM BATTERY out of the reach of the children.
Should the battery be swallowed, consult a doctor immediately.
2
1
3
4
Preparing
Connecting the Power Source
ENGLISH
18
✤
There are two ways to connect to a power source.
-
Using the AC Power Adapter : used for indoor recording.
-
Using the Battery Pack: used for mobile/outdoor recording.
To use the AC Power Adapter
1. Connect the AC Power Adapter to the AC power cord.
2. Connect the AC cord to a wall socket.
Note: The plug and wall socket type can be different according to the regional conditions.
3. Connect the other end of the DC cable to DC jack of the camcorder.
4. Set the camcorder to CAMERA mode.
a. Hold down the tab of the power switch and push the switch up to CAMERA mode.
b.
Make sure that the Lens Cap is removed and secured.
c.
Open the LCD Screen and make sure that the image appears on the LCD Screen.
-
The LCD Screen will switch on automatically when opened more than 30 degrees.
Note:
If the adapter is used next to a TV or the camcorder, it may cause interference on the TV or camcorder.
Keep the adapter away from the TV, camcorder or the antenna cable during use.
2
1
3
CAMERA
Summary of Contents for VP-L900
