RTS DKP-4016, Technical Manual

Page: 141 / 282

DKP-4016 Basic Operation 141
Bosch Security Systems, Inc. Technical Manual
F.01U.308.248 Rev. 03
Mixing Group Box
The Mixing group box allows you to route selected input audio signals to different destinations. For a complete list of
destinations and more information, see “Mixing” on page 188.
IMPORTANT: OMNEO 3 through OMNEO 8 only appear when the Audio Package is purchased, otherwise, they do
not display.
To mix inputs and outputs , do the following:
1.
Using both axis lists, select the check boxes that correlate to the inputs and outputs you want to mix .
2.
From the Mix Mode drop down menu, select Switched or Always On .
For more information on Mix Mode, see “Mix Mode” on page 190.
IMPORTANT: Not every input can be mixed to every output. Check boxes are not present for mixes that cannot be set
here. Some mixes are made using the Headset/Speaker and Headset Mic/Panel Mic menus when setting
the modes to Always On/Enabled, Disabled, or Switched.
FIGURE 74.
Advanced Page – Mixing Group Box