RTS DKP-4016, Technical Manual

Page: 232 / 282

232 DKP-4016 Menu System DKP-4016
Bosch Security Systems, Inc. Technical Manual F.01U.308.248 Rev. 03
Service Menu, LCD Backlight
The LCD Backlight menu option allows you to set the brightness of the panel display of all keypanels, just the main panel or
any expansion panel connected to the main keypanel.
The range for this field is 0–100%.
The default is 65% .
To configure the LCD backlight , do the following:
1.
Starting at the Service|Keypad menu, select LCD Backlight .
2.
Press the SEL button .
The Brightness scroll box appears in the panel display.
3.
Using the up and down arrow buttons, select the brightness you want to display.
Service Menu, Local GPIO
Local GPIO is used to configure GPIO inputs and outputs. Inputs can be assigned to activate intercom keys (including group
master keys). Outputs can be activated by talk or UPG keys.
Further configuration can be done to allow GPIO Inputs to track the state of the Output. For example, an output is activated
(and is being tracked by an input), the input is also activated. This feature allows GPIO Outputs to control Talk Key or Key
Group activation.
In addition to tracking, you can also configure the way an Input GPIO Key Group is configured. By default, when a key group
is activated, the keys are forced on until the key group is deactivated. This is referred to as Level Mode. Alternatively, you can
configure the key group to Edge Mode. This option turns on keys in a key group when the group is activated, but allows the
user to turn off individual keys even if the key group is still active.
To configure a GPIO Input to control an individual talk key , do the following:
1.
Starting at the Service|Local GPIO menu, select GPIO Inputs .
2.
Press the SEL button .
Opto 1 and Opto 2 appear in the panel display .
3.
Using the arrow buttons,

select Opto 1 or Opto 2 .
4.
Press the SEL button .
Function and Mode appear in the panel display.
5.
Using the arrow buttons, select Function .
6.
Press the SEL button .
Key Group, Not Assigned, and Talk Key appear in the panel display.
7.
Using the arrow buttons,

select Talk Key .
8.
Press the SEL button .
Tap Key appears in the panel display.
9.
Tap the talk key to be controlled by the GPIO Input.
The selected keypanel key red talk indicator LED appears.
To configure a GPIO Input to control a Key Group , do the following:
1.
Starting at the Service|Local GPIO menu , select GPIO Inputs .
2.
Press the SEL button .
Opto 1 and Opto 2 appear in the panel display .
3.
Using the arrow buttons,

select Opto 1 or Opto 2 .
4.
Press the SEL button .
Function and Mode appear in the panel display.
5.
Using the arrow buttons, select Function .