28 Installation
DKP-4016
Bosch Security Systems, Inc.
Technical Manual
F.01U.308.248
Rev. 03
Speaker 2-Position Terminal Block Connector
The
Speaker 2-Position Terminal Block Connector
is used to connect an external speaker to the keypanel. This may be a
speaker in another room or a speaker the user likes to use.
Wire Specifications
Solid Wire: 26-16AWG/0.13–1.5mm
2
Stranded Wire: 26-16AWG/0.13–1.5mm
2
Torque: 3.0lb-IN/0.34Nm
WARNING:
The positive (+) and negative (-) terminals of the connector should be connected to the positive (+) and
negative (-) terminals of the external speaker. These terminals should never be connected to GND or
permanent damage can occur.
To
connect the 2-position terminal block to the keypanel
, do the following:
1.
Align the
2-position
t
erminal block connector with the 2-position connector
on the rear side of the keypanel.
2.
Gently push the
connector
into place.
To
detach the 2-position terminal block connector from the keypanel
, do the following:
>
Using the thumb and fore-finger, carefully wiggle the
2-position terminal block
until is comes free from the
connector.
Summary of Contents for DKP-4016
