RTS DKP-4016, Technical Manual

Page: 58 / 282

58 Basic Operation DKP-4016
Bosch Security Systems, Inc.
Technical Manual F.01U.308.248 Rev. 03
Setup Pages
Setup Pages are used to allow access to more key assignments than there are physical keys on the keypanel. This is useful for
sharing a keypanel because you can use setup pages to swap between the key assignments used for each person.An alternative
to Setup Pages is Panel Swap (see, “Key Options Menu, Panel Swap” on page 218). Note, with Panel Swap, your system must
be configured for more keys per panel, whereas with Setup Pages, you do not need to increase the number of keys per panel,
but can simply assign different setup pages to each row of keys.
You can have up to 15 setup pages per keypanel port.
NOTE: To change the Setup Pages available for ports, in AZedit go to Options|Intercom Configuration|Options tab.
Change the Setup Pages per port field to the number of pages needed.
By default, eight (8) pages are available.
IMPORTANT: To add key assignments to the setup pages, see “Menu System, Key Assign Menu” on page 208.
To open and assign setup pages , do the following:
1.
Press the PAGE key .
The Page menu appears in the display screen .
2.
Press SEL to get to the graphical mode
OR
Enter a
digit (page number) .
3.
Tap a key to assign that page to the key row.
To toggle between setup pages , do the following:
1.
Using the left and right arrows, change the page on the current key row .
2.
Press the SEL key (or just wait 2 seconds to auto-select).
To change the highlighted key row in the graphical mode , do the following:
>
Using the FWD/BACK or UP/DOWN keys, change the highlighted key row .
OR
Press the
SHIFT + LEFT buttons or the SHIFT + RIGHT buttons to change the highlighted key row.