218 DKP-4016 Menu System
DKP-4016
Bosch Security Systems, Inc.
Technical Manual
F.01U.308.248
Rev. 03
Key Options Menu, Lock (Button Lock)
Lock
is used to lock keypanel keys in the on or off position. Each key may be independently locked on or off.
To
lock a button on
, do the following:
1.
Starting at the Key Options| menu, select
Lock
.
2.
Press the
SEL button
.
Tap Key appears in the panel display.
3.
Tap a
key
once to lock it on.
A green indicator appears. This indicates the key is locked on.
OR
Tap the
key again
to lock it off.
A red indicator appears indicating the key is locked off, meaning the user cannot turn the key on or off.
OR
Tap the
key again
to release the lock.
Key Options Menu, Panel Swap
Panel Swap
gives users the ability to quickly and easily change a group of keypanel assignments on the keypanel. This is done
through the use of virtual expansion panels. Panel swap differs from changing setup pages because the keys can stay active
even when they are no longer visible on the main panel. Also, panel swap allows the user a 1-touch trigger to complete two (2)
actions at once.
Even though the DKP-4016 does not support physical EKPs, Panel Swap and Virtual EKPs are still available for use.
IMPORTANT:
The number of actual physical keys on the keypanel must be less than the numbers of keys per port
supported by the intercom.
For example, the DKP-4016 has 16 physical keys and if the matrix supports 64 keys per port; then three
virtual EKPs can be used (since each EKP adds 16 virtual keys to the keypanel).
Panel swap can be activated by (or triggered by) a UPG key, a GPI Input, or GPI Output allowing local or remote access. A
GPI board does not need to be installed to be controlled by GPI Outputs. However you must set up a Setup Page in AZedit for
the virtual EKP to be able to assign key assignments.
Panel Swap Control Options
There are five (5) ways to activate panel swap:
Keypad FWD
Keypad BACK
Keypad UPG1 to UPG 9
GPI Inputs Opto 1 and Opto 2
GPI Outputs Relay 1 and 2
Summary of Contents for DKP-4016
