RTS DKP-4016, Technical Manual

Page: 213 / 282

DKP-4016 DKP-4016 Menu System 213
Bosch Security Systems, Inc. Technical Manual F.01U.308.248 Rev. 03
Key Options Menu, Auto Dial
Auto Dial stores commonly used phone numbers in the auto dial list locally on the keypanel.
You can also create a centralized auto dial list which is stored on the Master Controller and maintained through AZedit. For
more information, see “Centralized Auto Dials” on page 247.
You can configure up to 100 locally stored auto dial numbers .
You can also configure 1-Touch TIF Auto Dial. 1-Touch Auto Dials are configured using the locally stored numbers on the
keypanel. Once a 1-Touch Auto Dial key is configured, pressing the configured key causes the TIF to go off-hook and auto
dial the selected number.
To store an auto dial number , do the following:
1.
Starting at the Key Options|Auto Dial menu, select Numbers .
2.
Press the SEL button .
#01:<empty> appears in the panel display.
3.
Use the arrow buttons, to scroll to the auto dial entry you want to use.
NOTE: There are up to 100 auto dial entries available.
4.
Press the SEL button .
#01: with a blinking cursor appears in the panel display .
5.
Using the keypanel keypad, enter the phone number you want to store (for example, 5551234567).
IMPORTANT: You can use either FWD/BACK or Aux Shaft Encoder push (FWD)/MAIN Shaft Encoder push
(BACK) on the DKP-4016.
6.
On the keypanel keypad, press FWD .
Save Number? appears in the panel display .
7.
Press the SEL button .
The auto dial position number and telephone number appear in the panel display .
To delete a stored auto dial number , do the following:
1.
Starting at the Key Options|Auto Dial menu, select Numbers .
2.
Press the SEL button .
#01:<empty> appears in the panel display.
3.
Using the arrow buttons

select the Auto Dial number you want to remove.
4.
Press the SEL button .
#01: with a flashing cursor appears .
NOTE: #01 is used for example purposes only. Depending on the auto dial number you want to delete determines the
number seen here.
5.
Press FWD .
Save Number? appears.
6.
Press the SEL button .
#01: <empty> appears in the panel display. The auto dial number is erased .