RTS DKP-4016, Technical Manual

Page: 194 / 282

194 DKP-4016 Menu System DKP-4016
Bosch Security Systems, Inc. Technical Manual F.01U.308.248 Rev. 03
Audio Options Menu, Headset Speaker
The Headset Spkr menu option is used to control the headset detection functions: auto-transfer, which is used to detect if a
headset is present and mode, which determines when and where audio is heard. Also from this menu, the Main shaft encoder is
defined how to control the left and right speakers.
Volume Control
Available selections for the Volume Control menu are:
Ganged The volume controls are tied to each other, only one knob is turned to adjust volume levels.
The volume of both left and right headset speakers are controlled together.
Individual The volume controls are separate to each other.
NOTE: If you gang speakers and/or headset volumes, you may see a split volume bar if the left and right have different
volumes with ganging is enabled. The front speaker or left headset is the top portion of the bar, while the bottom
portion of the bar is the rear speaker or right headset volume.
To define how the Main Volume shaft encoder controls the volume for the left and right headset speakers , do the
following:
1.
Starting at the Audio Options|Headset Spkr menu, select Volume Control .
2.
Press the SEL button .
Ganged and Individual appear in the panel display.
3.
Using the left or right arrow buttons, select Ganged or Individual .
4.
Press the SEL button .
An arrow appears next to the selected option.
Auto-Transfer
Available selections for the Auto-transfer menu are:
Disabled
Enabled When enabled, the keypanel automatically enters or leaves headset mode when a headset is
plugged in or removed.
To configure the Headset Auto-Transfer function , do the following:
1.
Starting at the Audio Options|Headset Spkr menu, select Left or Right .
2.
Press the SEL button .
Auto-Transfer and Mode appear in the panel display .
3.
Using the left or right arrow buttons, select Auto-Transfer .
4.
Press the SEL button .
Disabled and Enabled appear in the panel display .
5.
Using the left or right arrow buttons, select Disabled or Enabled .
6.
Press the SEL button .
An arrow appears next to the selected option.