RTS DKP-4016, Technical Manual

Page: 27 / 282

DKP-4016 Installation 27
Bosch Security Systems, Inc. Technical Manual F.01U.308.248 Rev. 03
GPIO 12-Position Terminal Block Connector
The GPIO 12-Position Terminal Block Connector is used to provide connections to relays (outputs) and opto-isolators
(inputs). Using the table, “GPIO Connector: J10” on page 17, connect the correct wires to the 12-position connector.
Wire Specifications
Solid Wire: 26-16AWG/0.13–1.5MM
2
Stranded Wire:26-16AWG/0.13–1.5MM
2
To connect the 12-position terminal block to the keypanel , do the following:
1.
Align the t erminal block connector with the 12-position connector on the rear side of the keypanel.
2.
Gently push the connector into place.
You should see the locking levers lock into place .
To detach the 12-position terminal block connector from the keypanel , do the following:
>
Using both thumbs, gently press up on the locking levers.
The connector is released from the keypanel.