RTS DKP-4016, Technical Manual

Page: 182 / 282

182 DKP-4016 Menu System DKP-4016
Bosch Security Systems, Inc. Technical Manual F.01U.308.248 Rev. 03
7.
Using the arrow buttons, select Enabled .
8.
Press the SEL button .
An arrow appears next to the selected option .
9.
Press the CLR button .
Frequencies and Mode appear in the panel display .
10.
Using the left and right arrow buttons, select Frequencies .
11.
Press the SEL button .
The Low Freq scroll box and the High Freq scroll box appear in the panel display.
12.
Using the up and down arrow buttons, select the low frequency you desire.
13.
Using the left and right arrow buttons, select the high frequency scroll box .
14.
Using the up and down arrow buttons, select the high frequency you desire.
Equalization
Equalization allows the user to select predefined settings that modify the frequency envelope of an audio channel. This is
a 5-band equalizer. Each preset provides a different EQ to be applied to the audio. To view all of the bands, see
“Adjustable 5-Band Equalization – Audio Package Only” on page 183.
Available selections for this menu are:
Default 0 dB (15Hz–20kHz)
Hiss Reduction 0 dB (15Hz–2kHz)
-6 dB (2kHz–12.6kHz)
Rumble Reduction 0 dB (50Hz–20kHz)
Noise Reduction 0 dB (50Hz–2kHz)
-6 dB (2kHz–8kHz)
-80dB (8kHz–12.6kHz)
To configure a preset frequency response for an input , do the following:
1.
Starting at the Audio Options|Advanced|Filters menu, select Equalization .
Inputs and Outputs appears in the panel display.
2.
Using the arrow buttons, select either Input .
3.
Press the SEL button .
Front Mic, Left Hdst, Matrix In, Rear Mic, and Right Hdst appear in the panel display.
4.
Using the arrow buttons, select either Front Mic, Left Hdst, Matrix In, Rear Mic, and Right Hdst .
5.
Press the SEL button .
Mode and Presets appear in the panel display.
6.
Using the arrow buttons, select Mode .
Disabled and Enabled appear in the panel display .
7.
Using the arrow buttons, select Enabled .
8.
Press the SEL button .
An arrow appears next to the selected option .
9.
Press the CLR button.
Mode and Presets appear in the panel display .
10.
Using the arrow buttons, select Presets .
11.
Press the SEL button .
Default, Hiss Reduction, and Rumble Reduction appear in the panel display.
12.
Using the arrow buttons, select Default , Hiss Reduction , or Rumble Reduction .
13.
Press the SEL button .
An arrow appears next to preset selected.