RTS DKP-4016, Technical Manual

Page: 75 / 282

DKP-4016 Basic Operation 75
Bosch Security Systems, Inc. Technical Manual
F.01U.308.248 Rev. 03
Tally # Column
The Tally # column displays the tally number. This number is associated with the tally description and is used in creating UPL
statements. AZedit supports 20 different tallies, however, the first 10 are predefined.
Mode Column
The Mode column is used to select the type of tally to use.
There are three (3) options available:
No Tally
Flash Text Flashes text for a user-determined (duration column) amount of time.
Flash Icon Shows an icon for a user determined (duration column) amount of time. For more information, see
Table 8, “Tally Icon Descriptions,” on page 81.
Description Column
The Description column is used to enter a description of the tally you create.
IMPORTANT: It is recommended you do not change the pre-defined tallies descriptions. Changing the description does
not change pre-defined purpose of the tally. For example, if you change the description for IFB Busy to
Trunk Busy, it still activates when an IFB is busy and may be confusing to users.
To change the Description column , do the following:
1.
In the Description column, double-click the tally description you want to change.
The selected Description cell becomes active.
2.
In the cell, enter the tally description you want.
Duration Column
The Duration column is used to select the duration the tally is activated for.
Available options for this field are: Indefinite and one (1) second through five (5) minutes.
To set the tally duration , do the following:
1.
In the Duration column, select the duration of the tally you want to change.
A drop down menu appears.
2.
From the drop down menu, select the desired duration .
TABLE 7.
Predefined Tallies
Tally # Description
1 Incoming Call
2 Extend Call
3 Trunk in Use
4 Trunk Busy
5 IFB in Use
6 IFB Busy
7 PL in Use
8 General In Use
9 TIF Off-Hook
10 TIF Ringing