226 DKP-4016 Menu System
DKP-4016
Bosch Security Systems, Inc.
Technical Manual
F.01U.308.248
Rev. 03
Select If Idle
When a new call comes into the CWW queue, it goes to the top of the queue list and the
highlight is moved to it only if the user has not interacted with the CWW in the last 5
seconds. Or if the CWW window was not visible.
To
configure the action to take when a new call comes into the keypanel
, do the following:
1.
Starting at the Service menu, select
CWW
.
2.
Press the
SEL button
.
Number of Entries and On New Caller appears in the panel display.
3.
Using the arrow buttons, select
On New Caller
.
4.
Press the
SEL button
.
Select New Call, Select If Idle, and Don’t Select appear in the panel display.
5.
Using the arrow buttons, select
Select New Call
,
Select If Idle
or
Don’t Select
.
Service Menu, Display
The
Display
menu is used to enable the menu context, display speaker volume and to switch the display to emulate a KP-32
keypanel.
Menu Context
The
Menu Context
feature
is used to enable or disable the bread-crumb navigation in the upper-left corner of the keypanel
panel display. Breadcrumb navigation helps provide context in navigating through the keypanel menu.
Display Volume
The
Display Volume
feature is used to enable always-on display of the volume bar for Left Headset, Front Speaker, Matrix,
Right Headset, or Rear Speaker, depending on what is selected from the encoder knobs.
KP32 Emulation
The
KP32 Emulation
is used to switch the display alphas and background to emulate the KP32 with the black background
and green lettering.
IMPORTANT:
Only the display of key and key assignment changes, the menu structure and other display elements do
not revert to the KP32 display.
To
activate KP32 Emulation
, do the following:
1.
Starting at the Service|Display menu, select
KP32 Emulation
.
2.
Press the
SEL button
.
Disabled and Enabled appear in the panel display
.
3.
Using the arrow buttons, select
Enabled
.
4.
Press the
SEL button
.
The display panel changes to the KP32 Emulation mode
.
Service Menu, Footswitch
The
Footswitch
menu allows the user to enable the footswitch feature and configure how a latched talk key behaves when the
footswitch is released. In normal footswitch operation, latched talk keys go into a ready state waiting for the footswitch to be
pressed. When the footswitch is pressed, the latched talk keys become active. Then, when the footswitch is released, the
latched talk keys go back into a ready state. You can configure the keypanel so latched talk keys become unlatched when the
footswitch is released. In this mode, the footswitch is a one-time operation. Pressing the footswitch turns the keys on and
releasing the footswitch turns the keys off, unlatching them so the keys are unable to come on again with the next press of the
Summary of Contents for DKP-4016
