RTS DKP-4016, Technical Manual

Page: 131 / 282

DKP-4016 Basic Operation 131
Bosch Security Systems, Inc. Technical Manual
F.01U.308.248 Rev. 03
Headset Configuration Group Box
The Headset Configuration group box is used to define the microphone type – Auto-detect, Dynamic, or Electret. Also from
this group box, you configure Auto-Transfer and Auto-Mute.
For more information, see “Type” on page 193, “Auto-Transfer” on page 194, “Auto-Mute” on page 192
To configure a headset , do the following:
1.
From the Mic Type column drop down menu, select Auto Detect , Dynamic , or Electret .
2.
Select the Mic Auto-Mute check box to automatically mute mic input when a headset mic is not detected.
3.
Select the Headset Auto-Transfer check box to allow the keypanel to automatically enter or leave headset mode
when a headset is installed or removed.
4.
Select the Headset Transfer Active check box to make the headset active.
Ganged Volume Group Box
The Ganged Volume group box is used to set what happens when adjusting the volume for a ganged channel pair when the
volumes are not identical and one (1) of the volumes reaches the minimum or maximum level.
For more information on the available selections, see “Audio Options Menu, Ganged Vols” on page 192.
To configure ganged volumes , do the following:
1.
From the Ganged Volume Mode drop down menu, select Disappearing or Fixed .
2.
Select the Ganged Speaker Volume Control check box to enable the speaker volumes to be ganged.
3.
Select the Ganged Headset Volume Control check box to enable the headset volumes to be ganged.
FIGURE 60.
Audio Options Page – Headset Configuration Group Box
FIGURE 61.
Audio Options Page – Ganged Volumes Group Box