Ross NK Routing Systems RCP-QE, User Manual, Page: 45 / 68

RCP-QE User Guide (v02) Setting Up the RCP-QE • 4–25
To assign a panel lock button:
1. Open the RCP-QE Panel Configuration editor (see “ Opening the RCP-QE Panel Configuration Editor ” on
page 4–4).
2. On the simulated RCP-QE, select the button that you want to use for the panel lock.
The Button configuration box opens.
3. In the Button list, select Function Key .
4. In the Value field, select Panel Lock as the function to assign to this button.
5. Close the Button configuration box.
The simulated RCP-QE in DashBoard shows the lock on the selected button.
Assigning a Menu Link Button
You can assign a predefined menu to a button on the RCP-QE. For information on how to set up a menu see
“
Setting Up Menus ” on page 4–13.
To assign a menu to a button:
1. Open the RCP-QE Panel Configuration editor (see “ Opening the RCP-QE Panel Configuration Editor ” on
page 4–4).
2. On the simulated RCP-QE, select the button that you want to use for the menu link.
The Button configuration box opens.
3. In the Button list, select Menu Link .
4. In the Value field, use the list to select the menu you want to assign to the button.
5. Close the Button configuration box.
The simulated RCP-QE in DashBoard shows the menu on the selected button. For example, Menu 3 .
6. Click the Menu list below the simulated RCP-QE and select the menu that you have just assigned.
7. Assign functions to the buttons in this menu (see “ Assigning Functions to Buttons on the RCP-QE ” on
page 4–15).
For example, if this menu is for the purpose of selecting a destination, assign the buttons as destinations. You
may choose to have this destination menu fall back to a source menu.
8. Send the current configuration file to the device (see “ Sending a Configuration File to a Device ” on
page 4–33).
Assigning Menu Navigation to a Button
If you have multiple menus assigned in the RCP-QE, you may want to include some navigation buttons to enhance
movement through the menus.
To assign menu navigation to a button:
1. Open the RCP-QE Panel Configuration editor (see “ Opening the RCP-QE Panel Configuration Editor ” on
page 4–4).
2. On the simulated RCP-QE, select the button that you want to use for menu navigation.
The Button configuration box opens.
3. In the Button list, select Menu Navigate .
4. Use the Value list to select one of the following options:
• Home — returns to the menu defined in Menu Number 1 on the Menu Details tab.
• Next Menu — goes to the next menu if one is held in the buffer.