manualshive.com logo in svg

Ross NK Routing Systems RCP-QE, User Manual, Page: 19 / 68

Share
Download
Ross NK Routing Systems RCP-QE User Manual Download Page 19

RCP-QE User Guide (v02)

Installation • 3–5

Checking the Firmware Version

Firmware may be updated easily using DashBoard. To check for the latest firmware versions, contact Ross Video 
Technical Support.

To check the firmware version of a device using DashBoard:

1.

Open 

DashBoard

.

2.

In the 

Basic Tree View

, double-click the 

Connection

 icon (

) within the device tree (RCP-QE 2 in the 

icon is a name used for example purposes).

The 

Connection

 editor opens.

The firmware version is shown in the 

Version

 field in the general information area.

Upgrading the Firmware Version

Firmware upgrade files can be obtained by contacting Ross Video Technical Support.

To upgrade the RCP-QE firmware:

1.

Open 

DashBoard

.

2.

In the 

Basic Tree View

, double-click the 

Connection

 icon (

) within the device tree (RCP-QE 2 in 

the icon is a name used for example purposes).

The 

Connection

 editor opens.

3.

Click 

Send Firmware

.

The 

Open

 file browser opens.

4.

Navigate to where you have stored the firmware file and select it.

5.

Click 

Open

.

The 

Confirm Upload

 dialog box opens.

6.

Click 

Continue

.

A progress bar is displayed. When the upload has completed, a confirmation box opens.

7.

Click 

OK

.

8.

Click 

Reboot

 to restart the device and activate the new firmware.

Summary of Contents for NK Routing Systems RCP-QE





































































Reviews:

No comments