manualshive.com logo in svg

Ross NK Routing Systems RCP-QE, User Manual, Page: 24 / 68

Share
Download
Ross NK Routing Systems RCP-QE User Manual Download Page 24

4–4 • Setting Up the RCP-QE

RCP-QE User Guide (v02)

Toolbar Buttons

Refresh

 – click this button to revert to the configuration previously sent to the RCP-QE. The RCP-QE Connection 

Editor will display the last settings that were sent to the RCP-QE via the Send Configuration button.

Send Firmware

 – click this button to open a file browser to select a software/firmware file to send to the RCP-QE.

Send Configuration

 – click this button to upload the settings to the RCP-QE.

All configuration items become active only after uploading by sending the configuration to the device.

Reboot

 – click this button to reboot the RCP-QE. This function does not clear the RCP-QE settings.

Close

 – click this button to close the RCP-QE Connection Editor in DashBoard.

RCP-QE Panel Configuration Editor

The RCP-QE Panel Configuration editor enables users to setup device details, panel button assignments, menus, 
I/O assigns, and macros.

Opening the RCP-QE Panel Configuration Editor

To open the RCP-QE Panel Configuration editor:

1.

In 

DashBoard

, expand the tree view for the RCP-QE in the 

Basic Tree View

.

Figure 4.4  

Basic Tree View in DashBoard

2.

Double-click the 

Panel Config

 icon (

) within the device tree.

Summary of Contents for NK Routing Systems RCP-QE





































































Reviews:

No comments