manualshive.com logo in svg

Ross NK Routing Systems RCP-QE, User Manual, Page: 8 / 68

Share
Download
Ross NK Routing Systems RCP-QE User Manual Download Page 8

ii • Contents

RCP-QE User Guide (v02)

Using Category Index Mode ................................................................................................................................. 5-4
Locking the RCP-QE ............................................................................................................................................ 5-5
Protecting a Destination ........................................................................................................................................ 5-5
Clearing Protects Held by an RCP-QE ................................................................................................................. 5-6
Toggling Between Two Sources ........................................................................................................................... 5-6
Using a Menu ........................................................................................................................................................ 5-7
De-Assigning a Machine Control Port .................................................................................................................. 5-7
De-Assigning Resources ....................................................................................................................................... 5-7
Resetting Devices.................................................................................................................................................. 5-8
Viewing Status and Alarms................................................................................................................................... 5-8
Operating Linked Remote Control Panels ............................................................................................................ 5-8

Troubleshooting 6

RCP-QE Hexadecimal to Router Level Conversion 

7

Summary of Contents for NK Routing Systems RCP-QE





































































Reviews:

No comments