3–4 • Installation
RCP-QE User Guide (v02)
2.
Locate the RCP-QE you want to add to DashBoard and configure the following information if necessary:
•
Name
– double click inside the cell to enter a name for the RCP-QE.
The default is RCP-QE.
•
Address
– double click inside the cell to enter an IP address for the RCP-QE.
The default is 192.168.20.130.
•
Netmask
– double click inside the cell to enter an IP netmask for the RCP-QE.
The default is 255.255.255.0.
•
Gateway
– double click inside the cell to enter an IP gateway for the RCP-QE.
The default is 192.168.20.1.
3.
In
DashBoard
, click
File
>
New
>
NK-IPS Connection
.
The
NK-IPS Connection
window opens.
Figure 3.2
The NK-IPS Connection window
4.
In the
IP Address
box, enter the IP address of the RCP-QE you want to add to DashBoard.
5.
Use the
Port
list to select a port number.
The default is 5000. If the port number is changed in Walkabout, the port number in the NK-IPS Connection
window must be configured to reflect this change.
6.
Click
Finish
.
The
NK-IPS Connection
window closes and the RCP-QE is added to the devices listed in the
Basic Tree
View
.
Summary of Contents for NK Routing Systems RCP-QE
