manualshive.com logo in svg

Ross NK Routing Systems RCP-QE, User Manual, Page: 17 / 68

Share
Download
Ross NK Routing Systems RCP-QE User Manual Download Page 17

RCP-QE User Guide (v02)

Installation • 3–3

Accessing the RCP-QE in DashBoard

Before you can set up and send a configuration file to the RCP-QE, you must access it in DashBoard. In order to 
access the RCP-QE in DashBoard, the RCP-QE needs to be detected and the IP address for the LAN configured for 
use within a network using Walkabout. Once the network settings are configured in Walkabout, the RCP-QE is 
visible in DashBoard and can have the device details configured and a configuration file sent to it.

Installing DashBoard

Download DashBoard at http://www.rossvideo.com/ and follow the installation instructions.

Ensure that DashBoard has all the latest module updates before proceeding.

For More Information on...

• updating DashBoard see the DashBoard on-line help.

Adding an RCP-QE to DashBoard

The RCP-QE can be added to DashBoard via automatic discovery or manually using The NK-IPS Connection 
window.

Adding an RCP-QE to DashBoard via Automatic Discovery

The RCP-QE can be detected in DashBoard using auto discovery via SLP once the IP address for the LAN has been 
configured for use within a network using Walkabout.

To add an RCP-QE to DashBoard:

1.

Open 

Walkabout

.

If necessary, click 

Refresh

 to query the network for RCP-QE devices.

2.

Locate the RCP-QE you want to add to DashBoard and configure the following information if necessary:

•

Name

 – double click inside the cell to enter a name for the RCP-QE.

The default is RCP-QE.

•

Address

 – double click inside the cell to enter an IP address for the RCP-QE.

The default is 192.168.20.130.

•

Netmask

 – double click inside the cell to enter an IP netmask for the RCP-QE.

The default is 255.255.255.0.

•

Gateway

 – double click inside the cell to enter an IP gateway for the RCP-QE.

The default is 192.168.20.1.

3.

Open 

DashBoard

.

4.

Refresh the 

Basic Tree View

.

The RCP-QE is added to the devices listed in the 

Basic Tree View

.

Manually Adding an RCP-QE to DashBoard

RCP-QE can be added manually to DashBoard by entering its IP address using the NK-IPS Connection window 
once it has been configured for use within a network using Walkabout.

To manually add an RCP-QE to DashBoard:

1.

Open 

Walkabout

.

If necessary, click 

Refresh

 to query the network for RCP-QE devices.

Summary of Contents for NK Routing Systems RCP-QE





































































Reviews:

No comments