Ross NK Routing Systems RCP-QE, User Manual, Page: 3 / 68

RCP-QE · User Guide
• Ross Part Number: 2201DR-201-02
• Release Date: March 31, 2016.
The information contained in this Guide is subject to change without notice or obligation.
Copyright
©2016 Ross Video Limited, Ross®, and any related marks are trademarks or registered trademarks of Ross Video
Limited. All other trademarks are the property of their respective companies. PATENTS ISSUED and PENDING.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any
form or by any means, mechanical, photocopying, recording or otherwise, without the prior written permission of
Ross Video. While every precaution has been taken in the preparation of this document, Ross Video assumes no
responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the
information contained herein.
Patents
Patent numbers US 7,034,886; US 7,508,455; US 7,602,446; US 7,802,802 B2; US 7,834,886; US 7,914,332; US
8,307,284; US 8,407,374 B2; US 8,499,019 B2; US 8,519,949 B2; US 8,743,292 B2; GB 2,419,119 B; GB
2,447,380 B; and other patents pending.
Notice
The material in this manual is furnished for informational use only. It is subject to change without notice and should
not be construed as commitment by Ross Video Limited. Ross Video Limited assumes no responsibility or liability
for errors or inaccuracies that may appear in this manual.
Important Regulatory and Safety Notices to Service Personnel
Before using this product and any associated equipment, read all the Important Safety Instructions listed below so
as to avoid personal injury and to prevent product damage.
Products may require specific equipment, and /or installation procedures be carried out to satisfy certain regulatory
compliance requirements. Notices have been included in this publication to call attention to these Specific
requirements.
Symbol Meanings
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the product. Failure to heed this information may present a risk of damage
or injury to persons or equipment.
Warning The symbol with the word “ Warning ” within the equipment manual indicates a
potentially hazardous situation, which if not avoided, could result in death or serious
injury.
Caution The symbol with the word “ Caution ” within the equipment manual indicates a potentially
hazardous situation, which if not avoided, may result in minor or moderate injury. It may
also be used to alert against unsafe practices.