Ross NK Routing Systems RCP-QE, User Manual, Page: 4 / 68

EMC Notices
US FCC Part 15
This equipment has been tested and found to comply with the limits for a class A Digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a Commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
CANADA
This Class “A” digital apparatus complies with Canadian ICES-003 .
Cet appareil numerique de la classe “A” est conforme a la norme NMB-003 du Canada.
Notice The symbol with the word “ Notice ” within the equipment manual indicates a situation,
which if not avoided, may result in major or minor equipment damage or a situation,
which could place the equipment in a non-compliant operating state.
Warning
Hazardous
Voltages The lightning flash with arrowhead symbol within an equilateral triangle is intended to
alert the user to the presence of uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of shock to persons.
ESD
Susceptibility
This symbol is used to alert the user that an electrical or electronic device or assembly is
susceptible to damage from an ESD event.
Warning
Important Safety Instructions
1.
Read these instructions.
2.
Follow all instructions and heed all warnings.
3.
Refer all servicing to qualified service personnel.
4.
The equipment’s external power supply AC appliance inlets are the means to
disconnect the product from the AC Mains and must remain readily operable for
this purpose.
5.
To avoid the risk of electrical shock and to completely disconnect the apparatus
from the supply AC appliance inlets prior to servicing.
6.
The safe operation of this product requires that a protective earth connection be
provided. A grounding conductor in the equipment's external power supply line
cord provides this protective earth. To reduce the risk of electrical shock to the
operator and service personnel, this ground conductor must be connected to an
earthed ground.
7.
Indoor Use: WARNING: To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture.
8.
Warning: This product includes an “Ethernet Port” for connection to a local area
network (LAN). This Ethernet port interface is designed for intra-building
networks only.
Do not connect this port to networks that go outside of the building.
Notice
Changes or modifications to this equipment not expressly approved by Ross Video Ltd. could
void the user’s authority to operate this equipment.