manualshive.com logo in svg

Ross NK Routing Systems RCP-QE, User Manual, Page: 31 / 68

Share
Download
Ross NK Routing Systems RCP-QE User Manual Download Page 31

RCP-QE User Guide (v02)

Setting Up the RCP-QE • 4–11

Button Assignments

By default, the 17 buttons on the RCP-QE are assigned the following functions:

• buttons 1 to 6: destinations (outputs 1 to 6, respectively)
• buttons 7 to 13: sources (inputs 1 to 7, respectively)
• button 14: Level 1
• button 15: Macro 1
• button 16: Menu 2
• button 17: Menu 3

Assigning Physical Connections for Control by an RCP-QE

Source and destination equipment is physically connected to routing switchers. This connection information must 
be displayed meaningfully on the RCP-QE. This information is set up on the 

Input Assigns

 and 

Output Assigns

 

tabs.

Selecting the Number of Outputs/Inputs

Depending on the size of the routing switchers connected, you may choose to increase or reduce the number of 
output and input labels to match the size of the routing switcher if virtual routing is not used. The number can be 
changed in increments of 8.

If the RCP-QE is connected to an Ultrix router or Ultricore Central Controller, the number of inputs and outputs 
are defined by the Ultrix/Ultricore set up. Changes to Ultrix or Ultricore will overwrite any manual changes 
made on the remote control panel.

To change the number of possible inputs and outputs:

1.

Open the RCP-QE Panel Configuration editor (see “

Opening the RCP-QE Panel Configuration Editor

” on 

page 4–4).

2.

Perform one of the following:

• To change the number of outputs, select the 

Output Assigns

 tab.

• To change the number of inputs, select the 

Input Assigns

 tab.

3.

Use the 

Number of outputs

/

Number of inputs

 box to enter or select the number of outputs/inputs to match 

the requirements of your routing switcher system.

4.

Click 

Update

.

5.

If you want to transfer this number of outputs/inputs to the other tab, click 

Copy to Input Assigns

/

Copy to 

Output Assigns

. The labels are also copied.

6.

Send the current configuration file to the device (see “

Sending a Configuration File to a Device

” on 

page 4–33).

Assigning Output and Input Labels

To assign output and input labels:

1.

Open the RCP-QE Panel Configuration editor (see “

Opening the RCP-QE Panel Configuration Editor

” on 

page 4–4).

2.

Perform one of the following:

• To change the label for an output, select the 

Output Assigns

 tab.

• To change the label for an input, select the 

Input Assigns

 tab.

Summary of Contents for NK Routing Systems RCP-QE





































































Reviews:

No comments