Ross NK Routing Systems RCP-QE, User Manual, Page: 53 / 68

RCP-QE User Guide (v02) Setting Up the RCP-QE • 4–33
Opening a Saved Configuration
To open a saved configuration:
1. In the File Navigator pane, navigate to the saved configuration file that you want to open.
2. Double-click on the icon for the file.
Sending a Configuration File to a Device
When you have made changes to the configuration of a device, the changes are not activated in the device until the
changes to the configuration are sent to the device. You can open a saved configuration file, make changes to it,
save it, and then send it to a device.
To send the current configuration to a device:
1. Select the Panel Configuration editor tab containing the configuration that you want to send to a device.
If you want to send the default configuration to a device, open the default configuration file from the File
Navigator pane (see “ Opening a Saved Configuration ” on page 4–33).
2. In the Basic Tree View pane, select the corresponding device.
3. Click Send Configuration .
The Send Config to NK Device dialog box opens. Any of the pages containing information that has been
changed are automatically selected for sending to the device.
Figure 4.6 Send Config to NK Device dialog box
4. Select the pages that you want to send to the device. Use the information Table 4.7 as a guide.
Table 4.7 Page Descriptions
Page Description
Select Pages Selecting this selects every page to send to the device.
Home The information contained in the Device Details frame and the
Configuration tab.
Key Definitions The information defining how buttons have been assigned.
Menu Details The information contained on the Menu Details tab.
Labels The information contained in the combined pool of input and output labels.
Input Assign The information contained on the Input Assigns tab.
Output Assign The information contained on the Output Assigns tab.
Macro Names The information contained on the Macro Names tab.
Macro Events The information contained on the Macro Events tab.