Ross NK Routing Systems RCP-QE, User Manual, Page: 27 / 68

RCP-QE User Guide (v02) Setting Up the RCP-QE • 4–7
Protect Mode – select a radio button to assign a protect mode to the panel:
• Block Other Panels – the protected destination and level(s) cannot be switched to another source by other
remote control panels.
The protected destination and level(s) can be switched to another source on the current remote control panel.
• Block All Panels – the protected destination and level(s) cannot be switched to another source by the current
remote control panel or other remote control panels.
Clear Protect(s) – select this check box to clear all protects from the panel.
Return to Home Menu – select this check box to return the panel to its home menu configuration.
Load Factory Defaults – select this check box to load the factory defaults of the panel.

All configuration items become active only after uploading by sending the configuration to the device.
Alarms
Protect (read-only) – the protect alarm can display the following statuses:
• No Protect (green) – indicates that there is no crosspoint protect enabled on the panel.
• Protect(s) (yellow) – indicates that a crosspoint protect is enabled on the panel.
For More Information on...
• protects, refer to “ Assigning a Protect Button ” on page 4–23.
• crosspoints, refer to “ Assigning a Crosspoint Button ” on page 4–18.
Menu Details Tab
Menu Details
Number of menus – enter or select a number of menus to use for the panel.
Update – click this button to update the amount of menus used for the panel.
Menu Number (read-only) – the list order number of the menu.
Menu Name – click inside the table cell to enter or edit a name for the selected menu.
Fallback Mode – click inside the table cell to use the list to select the fallback mode for the menu:
• Fallback Off – after a button in the menu is pressed, the RCP-QE remains on the menu the panel is currently
on.
• First Menu – after a button in the menu is pressed, the RCP-QE returns to Menu 1.
• Previous Menu – after a button in the menu is pressed, the RCP-QE returns to the menu that was active
prior to the current menu.
• Specified Menu – after a button in the menu is pressed, the RCP-QE returns to the menu specified in the
Fallback Menu column.
• Fallback Menu – if using Specified Menu as the fallback mode, click inside the table cell to enter a menu
number to return to after a button is pressed.
Menu Color – click inside the table cell to use the list to select a button color for the menu button.
Output/Input Assigns Tab

If the RCP-QE is configured to connect to an Ultrix router or Ultricore Central Controller, the output and input
assignments are managed from those devices. Any editing on the RCP-QE tabs will be overwritten. You can use
the Database to RCP button on the Network tab in the Ultrix/Ultricore interfaces to load input/output/level
assignments to the RCP-QE panel.