manualshive.com logo in svg

Ross NK Routing Systems RCP-QE, User Manual, Page: 23 / 68

Share
Download
Ross NK Routing Systems RCP-QE User Manual Download Page 23

RCP-QE User Guide (v02)

Setting Up the RCP-QE • 4–3

RCP-QE Connection Editor Field Descriptions

General

Serial Num

 (read-only) – the serial number is set in the factory before shipping and is unique to each device. This 

parameter is not user configurable.

Version

 (read-only) – the software/firmware version.

Device Details

Serial Num

 (read-only) – the serial number is set in the factory before shipping and is unique to each device. This 

parameter is not user configurable.

Hardware Rev

 (read-only) – the hardware version of the RCP-QE.

Details

 – assigned by the user to give an RCP-QE specific details. For example, a physical location or a brief 

description of its use.

This field has a maximum of 16 characters and is used for description and identification only.

MAC Address

 (read-only) – the Media Access Control address (MAC address) is the unique hardware address for 

the RCP-QE on a network. This parameter is not user configurable.

Name

 – this field can be assigned by the user to uniquely name an RCP-QE.

This field has a maximum of 16 characters and is used for description and identification only.

Group

 – a group number can be assigned by the user to organize devices into groups. For example, users can assign 

separate group numbers for devices in different physical areas.

This field has a maximum of 10 characters and by default is blank.

Network Settings

Newly assigned IP addresses and netmasks are checked for valid values before being applied to an RCP-QE. If 
the new values are invalid they will be discarded silently. Only a refresh of the RCP-QE Connection Editor will 
show that the values were not set.

IP Address

 – enter or edit the IP address of the device.

Netmask

 – enter or edit the IP netmask of the device.

Gateway

 – enter or edit the IP gateway of the device.

TCP Port

 – enter or select the Transmission Control Protocol port number used for network communication. By 

default, the TCP Port is 5000, and any client devices/apps should be setup with the same port number.

Servers to Connect to

#

 – the order priority of the servers.

IP Address

 – the IP address of the server.

Connected

 (read-only) – a selected check box indicates that there is a connection to the server. An unchecked box 

indicates that there is no connection.

Connections

Displays the number of clients connected to the RCP-QE.

Summary of Contents for NK Routing Systems RCP-QE





































































Reviews:

No comments