manualshive.com logo in svg

Ross NK Routing Systems RCP-QE, User Manual, Page: 5 / 68

Share
Download
Ross NK Routing Systems RCP-QE User Manual Download Page 5

EUROPE

This equipment is in compliance with the essential requirements and other relevant provisions of 

CE Directive 

93/68/EEC

.

INTERNATIONAL

This equipment has been tested to 

CISPR 22:1997

 along with amendments 

A1:2000

 and 

A2:2002

 and found to 

comply with the limits for a Class A Digital device.

Warranty and Repair Policy

The product is backed by a comprehensive one-year warranty on all components.

If an item becomes defective within the warranty period Ross will repair or replace the defective item, as 
determined solely by Ross.

Warranty repairs will be conducted at Ross, with all shipping FOB Ross dock. If repairs are conducted at the 
customer site, reasonable out-of-pocket charges will apply. At the discretion of Ross, and on a temporary loan basis, 
plug in circuit boards or other replacement parts may be supplied free of charge while defective items undergo 
repair. Return packing, shipping, and special handling costs are the responsibility of the customer.

This warranty is void if products are subjected to misuse, neglect, accident, improper installation or application, or 
unauthorized modification.

In no event shall Ross Video Limited be liable for direct, indirect, special, incidental, or consequential damages 
(including loss of profit). Implied warranties, including that of merchantability and fitness for a particular purpose, 
are expressly limited to the duration of this warranty.

This warranty is TRANSFERABLE to subsequent owners, subject to Ross’ notification of change of ownership.

Extended Warranty

For customers that require a longer warranty period, Ross offers an extended warranty plan to extend the standard 
warranty period by one year increments. For more information, contact your regional sales manager.

Notice

This is a Class A product. In domestic environments, this product may cause radio interference, 
in which case the user may have to take adequate measures.

Notice

Changes or modifications to this equipment not expressly approved by Ross Video Limited 
could void the user’s authority to operate this equipment.

Summary of Contents for NK Routing Systems RCP-QE





































































Reviews:

No comments