manualshive.com logo in svg

Ross NK Routing Systems RCP-QE, User Manual, Page: 16 / 68

Share
Download
Ross NK Routing Systems RCP-QE User Manual Download Page 16

3–2 • Installation

RCP-QE User Guide (v02)

Installing the Routing Switcher System

The RCP-QE uses a TCP network for connection. It connects to the T-BUS routing devices using either the 
NK-NET or the NK-IPS. The NK-NET receives phantom power from the T-BUS devices to which it is connected. 
If the device providing power loses power, the NK-NET loses power as well.

The RCP-QE can have up to three more NK-NETs configured as backups in the event that connection is lost to 
the primary NK-NET.

Figure 3.1  

RCP-QE connected within an NK routing system

To connect the remote control panel in the routing system:

1.

Place the RCP-QE into the rack frame and then fix in place with appropriate fasteners.

2.

Connect a standard CAT5/5e/6 Ethernet cable to the 

ETHERNET

 connector on the rear of the RCP-QE.

3.

Connect the other end of the standard CAT5/5e/6 Ethernet cable to the network TCP switch/hub.

4.

Connect another standard CAT5/5e/6 Ethernet cable to the network TCP switch/hub.

5.

Connect the other end of the standard CAT5/5e/6 Ethernet cable to the 

ETHERNET

 connector on the 

NK-NET.

6.

Connect a standard CAT5/5e/6 Ethernet cable to the 

T-BUS

 connector on the NK-NET.

7.

Connect the other end of the standard CAT5/5e/6 Ethernet cable to the 

T-BUS

 connector on the rear of any NK 

device that is connected by T-BUS to an NK Series router (including the router itself).

The NK device(s) must be powered up when the system is connected in order to provide phantom power to the 
NK-NET.

8.

Connect the 5 V 2 A power supply provided to the 

POWER

 connector on the rear of the RCP-QE.

9.

Connect the cable from the power supply to a suitable AC mains supply.

The RCP-QE is designed for installation into a standard 19" equipment rack. It has integrated rack ears, allowing 
it to be screwed in using standard screws and cage nuts.

TCP Switch/Hub

NK-NET

Routing Switcher

Appropriate

NK Series

power supply

T-BUS

Ethernet

Ethernet

Appropriate

RCP-QE

power supply

RCP-QE

Summary of Contents for NK Routing Systems RCP-QE





































































Reviews:

No comments