Instalattion and operating manual: MGSM 5.0/MGSM 5.0-PS v.1.8S EN
CONTENT “aaaa”
SMS message is sent as a
transmission test
CONTENT
“GSM Module
OK”
“aaaa” = maximum 20
characters
TIME hh:mm
Transmission test time,
according to the option:
“EVERYDAY AT”
TIME 08:30
- Requires adjusting the
module clock
INTERVAL hh
Cycle time between
transmission tests in hours,
according to the option:
“EVERY (number of) HOURS”
INTERVAL 24
- The cycle is counted from
restarting the module or the
RESET TEST command
Example:
yyyy TEST ON CONTENT “GSM Module OK” TIME 3:30 p.m.
yyyy = access code
7.5. Remote configuration of COUNTERS.
The configuration SMS syntax has the following format:
yyyy COUNTER [parameter1 parameter2 parameter3]
Where:
- yyyy = access code;
Parameter
Description (see paragraph 6.5.3)
Example
Remarks
SMS xx
The counter determines the maximum
number of SMS messages sent in 24
hours
SMS 40
xx = a number
between 1 and 99
FAILURE xx
The counter determines the maximum
number of sent SMS messages with
failure information
FAILURE 10
xx = a number
between 1 and 20
SMSATTEMPTS
xx
The counter determines the number of
attempts for sending a SMS message
corresponding to a particular problem
with transmission (for example:
temporary lack of GSM range)
SMSATTEMPTS
10
xx = a number
between 1 and 20
ex.
yyyy COUNTER SMS 40 FAILURE 10 SMSATTEMPTS 3
yyyy = access code
7.6. Remote configuration of TIMES.
The configuration SMS syntax has the following format:
yyyy TIMES [parameter1 parameter2 parameter3]
Where:
- yyyy = access code;
Parameter
Description
Example
Remarks
CALL xx
The parameter determines the
maximum time of a telephone
connection (VOICE-type
connection)
CALL40
xx = a number between 1
and 46 seconds
ENTRY xx
The parameter determines the
time of entering for the
ENTRY 15
xx = a number between 1
and 600 seconds
43
