Instalattion and operating manual: MGSM 5.0/MGSM 5.0-PS v.1.8S EN
10.1. DTMF control module state – armed, alarm deleting
DTMF CODE
(yyyy= access code)
Description /Event
Confirmation
(VSR-2 message or confirmation)
yyyy +[#]
ARMING
(module disarmed)
message: “ARMED”
confirmation: 1 sound 0,5s
yyyy +[#]
DISARMING
(module armed)
message: “DISARMED”
confirmation: 2 sounds 0,5s
yyyy +[#]
DISARMING AND ALARM
DELETING
(module armed and alarm
appears)
message: “DISARMED”
confirmation: 10 sounds 0,5s
yyyy +[#]
ALARM DELETING
(module disarmed and alarm
appears e.g. sabotage)
message: “DISARMED”
confirmation: 10 sounds 0,5s
In case of error:
message: “ERROR”
confirmation: 1 signal 1s
REMARKS
:
●
in case of ALARM DELETING, the module finishes telephone notification to the
rest of telephone numbers
10.2. DTMF control of module outputs state.
DTMF CODE
Description/Event
Confirmation
(VSR-2 message or confirmation)
DTMF ON +[*]
OUTPUT SWITCHED ON
(with assigned DTMF code)
message: “OUTPUT SWITCHED ON”
confirmation: 3 sounds 0,5s
DTMF OFF +[*]
OUTPUT SWITCHED OFF
(with assigned DTMF code)
message: “OUTPUT SWITCHED OFF”
confirmation: 4 sounds 0,5s
In case of error:
message: “ERROR”
confirmation: 1 signal 1s
10.3. Voice menu: functions and messages
The module in a configuration with the VSR-2 voice synthesizer enables reading and simple control
of arming process, module outputs and gaining information about a system state. The voice menu is
used for that and it may be used during a voice connection with the module. Entering menu takes
place after pressing [*] during the voice connection, menu functions are played in the following
order from 1-6:
[1] "SYSTEM STATE"
[2] "INPUTS STATE"
[3] "OUTPUTS STATE"
[4] „FAILURE”
[5] „ENTER CODE”
[5] „OBJECT SOUND”
50
