Instalattion and operating manual: MGSM 5.0/MGSM 5.0-PS v.1.8S EN
Output O1: connecting a relay 12VDC (coil).
-
O2, O3, O4
in the active state can connect (NO) or disconnect (NC) the 0V power supply (GND),
the open collector (OC) transistor outputs, control the ground of the power supply, 100mA max.
Output O2, O3, O4: connecting a siren 12VDC/100mA max.
(acoustical and/or optical signaling ).
Output O2, O3, O4: connecting a relay 12VDC (coil)
Output O2, O3, O4: connecting a LED (+12V=AUX)
-
AUX
power supply output for auxiliary equipment: 12V, 300mA max. The output has short circuit
protected by PTC fuse (resettable).
If the AUX output is loaded by current exceeding 300mA-600 mA the
automatic isolation of output voltage. Then
the load shall be disconnected from the AUX output for about 1 min.
11
RELAY
12V DC (coil)
SIREN
12V DC
100mA max.
RELAY
12V DC (coil)
LED
