Instalattion and operating manual: MGSM 5.0/MGSM 5.0-PS v.1.8S EN
Remarks:
•
it should be remembered, that the number via which we want to control the
output can not be “unlisted”.
•
if numbers 1-8 remain unmarked or ALL (ANY) option is chosen, the module
rejects calls from these numbers
6.4.3 ACTIVATING INPUTS/OUTPUTS
This tab is used to configure the mask of inputs/outputs for the output with the
INPUT/OUTPUT VIOLATION option selected.
The module enables controlling a given output by using the selected
inputs/outputs and one of four logical functions:
•
Logical function 'and'
(AND,
AB
Y
=
, where Y = output, A/B = input/output).
It is a logic circuit which has the following functions: Signal value “1” is present at the
output, only if both input signals have the logical value “1”.
A
B
Y
0
0
0
0
1
0
1
0
0
1
1
1
●
Logical function 'or'
(OR,
B
A
Y
+
=
, where Y = output, A/B = input/output).
It is a logical sum circuit which generates the signal value “1” at the output, if at least one of
the signals has the same value. It means that “0” appears only when both signals have “0”
value.
A
B
Y
0
0
0
0
1
1
1
0
1
1
1
1
•
Logical function 'nor'
(NOR,
B
A
Y
+
=
, where Y = output, A/B = input/output).
It is a logic circuit which has the signal value “1” at the output only when all signals are “0”.
25
