Instalattion and operating manual: MGSM 5.0/MGSM 5.0-PS v.1.8S EN
Entering a particular function relies on giving the DTMF code of the function e.g.
[1], [2]..... depending
on the number, the control is available or there is played information about the system state.
DTMF CODE
DESCRIPTION/EVENT
ACTION /MESSAGE
(kVSR-2 message or confirmation )
MAIN
MENU
FUNCTION
ON MENU
[*]
ENTERING VOICE
MENU
message:
[
1] "SYSTEM STATE"
[2] "INPUTS STATE"
[3] "OUTPUTS STATE"
[4] „FAILURE”
[5] „ENTER CODE”
[5] „OBJECT SOUND”
main menu played while waiting for chosen
functions by DTMF
[1]
[#]
return to the
main menu
SYSTEM STATE
message:
“ARMED”
“DISARMED”
“FAILURE”
“SABOTAGE” +”INPUT NUMBERNUMER”
depending on the system state
[2]
[#]
return to the
main menu
INPUTS STATE
message:
”INPUT ”OK”
”INPUT ”VIOLATION”
”INPUT ”SABOTAGE”
depending on inputs state, inputs switched off
according to the program are omitted
[3]
[#]
return to the
main menu
OUTPUTS STATE
message:
”OUTPUT ”OUTPUT SWITCHED ON”
”OUTPUT ”OUTPUT SWITCHED OFF”
depending on outputs state, state “SWITCHED
OFF” is equal to a normal sate, programmed in
the OUTPUTS-POLARIZATION bookmark
[4]
[#]
return to the
main menu
FAILURE
message:
“F ”FAILURE NUMBER”
1 – weak signal of GSM network below 2
“dashes”
2 – telephone isn't logged in the network
3 - failed 3 attempts of SMS sending per
series
4 – low supply voltage U<11V at the supplying
input
5 – overload input 01 (I>1A)
6 - lack of communication with the industrial
telephone module
51
